⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Oglala Lakota County County › Pine Ridge (57770)

Pine Ridge, SD (57770): well depth, water level & drilling cost

✓ 105 SD DANR records · Oglala Lakota County County

155 ftmedian well depth
109 ft–303 fttypical depth range
111 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Pine Ridge (57770) address — $49

How deep are wells in and around Pine Ridge (57770), South Dakota?

The median drilled well depth in and around Pine Ridge (57770) is 155 ft, based on 105 wells with recorded depths in the state SD DANR database. Half fall between 109 ft and 303 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Pine Ridge (57770)?

Applying published per-foot rates to the local median depth of 155 ft: drilling and casing alone typically runs $3,875–$10,075; a complete system including pump, pressure tank, and hookup typically runs $9,300–$15,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pine Ridge (57770)?

The median static water level is 111 ft below ground surface (middle half of wells: 72 ft–130 ft), from 9 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 12 100–150 ft 29 150–200 ft 14 200–300 ft 12 300–400 ft 16 400–600 ft 11 600+ ft 2
Looking at a specific property in Pine Ridge (57770)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pine Ridge (57770)

Free. Goes to licensed drillers working Oglala Lakota County County.

Part of Oglala Lakota County County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.