⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Meade County › Piedmont (57769)

Piedmont, SD (57769): well depth, water level & drilling cost

✓ 561 SD DANR records · Meade County

290 ftmedian well depth
160 ft–420 fttypical depth range
60 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Piedmont (57769) address — $49

How deep are wells in and around Piedmont (57769), South Dakota?

The median drilled well depth in and around Piedmont (57769) is 290 ft, based on 561 wells with recorded depths in the state SD DANR database. Half fall between 160 ft and 420 ft; 90% are shallower than 710 ft.

How much does it cost to drill a well in and around Piedmont (57769)?

Applying published per-foot rates to the local median depth of 290 ft: drilling and casing alone typically runs $7,250–$18,850; a complete system including pump, pressure tank, and hookup typically runs $17,400–$29,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Piedmont (57769)?

The median static water level is 60 ft below ground surface (middle half of wells: 27 ft–118 ft), from 59 measurements.

Drilled depth distribution

0–50 ft 57 50–100 ft 23 100–150 ft 51 150–200 ft 31 200–300 ft 121 300–400 ft 112 400–600 ft 92 600+ ft 74
Looking at a specific property in Piedmont (57769)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Piedmont (57769)

Free. Goes to licensed drillers working Meade County.

Part of Meade County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.