South Dakota Well Data › Perkins County › Mud Butte (57758)
Mud Butte, SD (57758): well depth, water level & drilling cost
✓ 112 SD DANR records · Perkins County
Pull every recorded well near a Mud Butte (57758) address — $49
How deep are wells in and around Mud Butte (57758), South Dakota?
The median drilled well depth in and around Mud Butte (57758) is 160 ft, based on 112 wells with recorded depths in the state SD DANR database. Half fall between 100 ft and 200 ft; 90% are shallower than 260 ft.
How much does it cost to drill a well in and around Mud Butte (57758)?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Mud Butte (57758)?
The median static water level is 75 ft below ground surface (middle half of wells: 60 ft–108 ft), from 13 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Perkins County.
Part of Perkins County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.