South Dakota Well Data › Pennington County › Keystone (57751)
Keystone, SD (57751): well depth, water level & drilling cost
✓ 426 SD DANR records · Pennington County
Pull every recorded well near a Keystone (57751) address — $49
How deep are wells in and around Keystone (57751), South Dakota?
The median drilled well depth in and around Keystone (57751) is 240 ft, based on 425 wells with recorded depths in the state SD DANR database. Half fall between 140 ft and 440 ft; 90% are shallower than 600 ft.
How much does it cost to drill a well in and around Keystone (57751)?
Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Keystone (57751)?
The median static water level is 65 ft below ground surface (middle half of wells: 35 ft–240 ft), from 83 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Pennington County.
Part of Pennington County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.