South Dakota Well Data › Campbell County › Mound City (57646)
Mound City, SD (57646): well depth, water level & drilling cost
✓ 174 SD DANR records · Campbell County
Pull every recorded well near a Mound City (57646) address — $49
How deep are wells in and around Mound City (57646), South Dakota?
The median drilled well depth in and around Mound City (57646) is 120 ft, based on 174 wells with recorded depths in the state SD DANR database. Half fall between 60 ft and 264 ft; 90% are shallower than 310 ft.
How much does it cost to drill a well in and around Mound City (57646)?
Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Mound City (57646)?
The median static water level is 25 ft below ground surface (middle half of wells: 12 ft–59 ft), from 12 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Campbell County.
Part of Campbell County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.