South Dakota Well Data › Corson County › Morristown (57645)
Morristown, SD (57645): well depth, water level & drilling cost
✓ 80 SD DANR records · Corson County
Pull every recorded well near a Morristown (57645) address — $49
How deep are wells in and around Morristown (57645), South Dakota?
The median drilled well depth in and around Morristown (57645) is 235 ft, based on 80 wells with recorded depths in the state SD DANR database. Half fall between 140 ft and 349 ft; 90% are shallower than 422 ft.
How much does it cost to drill a well in and around Morristown (57645)?
Applying published per-foot rates to the local median depth of 235 ft: drilling and casing alone typically runs $5,875–$15,275; a complete system including pump, pressure tank, and hookup typically runs $14,100–$23,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Morristown (57645)?
The median static water level is 118 ft below ground surface (middle half of wells: 71 ft–175 ft), from 14 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Corson County.
Part of Corson County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.