⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Dewey County › Eagle Butte (57625)

Eagle Butte, SD (57625): well depth, water level & drilling cost

✓ 92 SD DANR records · Dewey County

80 ftmedian well depth
52 ft–111 fttypical depth range
15 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Eagle Butte (57625) address — $49

How deep are wells in and around Eagle Butte (57625), South Dakota?

The median drilled well depth in and around Eagle Butte (57625) is 80 ft, based on 92 wells with recorded depths in the state SD DANR database. Half fall between 52 ft and 111 ft; 90% are shallower than 2,271 ft.

How much does it cost to drill a well in and around Eagle Butte (57625)?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Eagle Butte (57625)?

The median static water level is 15 ft below ground surface (middle half of wells: 8 ft–23 ft), from 4 measurements.

Drilled depth distribution

0–50 ft 23 50–100 ft 40 100–150 ft 11 150–200 ft 4 200–300 ft 4 300–400 ft 0 400–600 ft 0 600+ ft 10
Looking at a specific property in Eagle Butte (57625)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Eagle Butte (57625)

Free. Goes to licensed drillers working Dewey County.

Part of Dewey County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.