⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Todd County › Rosebud (57570)

Rosebud, SD (57570): well depth, water level & drilling cost

✓ 117 SD DANR records · Todd County

217 ftmedian well depth
165 ft–250 fttypical depth range
69 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Rosebud (57570) address — $49

How deep are wells in and around Rosebud (57570), South Dakota?

The median drilled well depth in and around Rosebud (57570) is 217 ft, based on 117 wells with recorded depths in the state SD DANR database. Half fall between 165 ft and 250 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Rosebud (57570)?

Applying published per-foot rates to the local median depth of 217 ft: drilling and casing alone typically runs $5,425–$14,105; a complete system including pump, pressure tank, and hookup typically runs $13,020–$21,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Rosebud (57570)?

The median static water level is 69 ft below ground surface (middle half of wells: 48 ft–80 ft), from 6 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 4 100–150 ft 12 150–200 ft 30 200–300 ft 53 300–400 ft 13 400–600 ft 0 600+ ft 1
Looking at a specific property in Rosebud (57570)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Rosebud (57570)

Free. Goes to licensed drillers working Todd County.

Part of Todd County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.