⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Todd County › Mission (57555)

Mission, SD (57555): well depth, water level & drilling cost

✓ 229 SD DANR records · Todd County

140 ftmedian well depth
100 ft–176 fttypical depth range
33 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Mission (57555) address — $49

How deep are wells in and around Mission (57555), South Dakota?

The median drilled well depth in and around Mission (57555) is 140 ft, based on 228 wells with recorded depths in the state SD DANR database. Half fall between 100 ft and 176 ft; 90% are shallower than 210 ft.

How much does it cost to drill a well in and around Mission (57555)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mission (57555)?

The median static water level is 33 ft below ground surface (middle half of wells: 25 ft–70 ft), from 19 measurements.

Drilled depth distribution

0–50 ft 35 50–100 ft 18 100–150 ft 72 150–200 ft 67 200–300 ft 36 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Mission (57555)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mission (57555)

Free. Goes to licensed drillers working Todd County.

Part of Todd County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.