⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Hughes County › Harrold (57536)

Harrold, SD (57536): well depth, water level & drilling cost

✓ 98 SD DANR records · Hughes County

53 ftmedian well depth
30 ft–1,450 fttypical depth range
10 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Harrold (57536) address — $49

How deep are wells in and around Harrold (57536), South Dakota?

The median drilled well depth in and around Harrold (57536) is 53 ft, based on 98 wells with recorded depths in the state SD DANR database. Half fall between 30 ft and 1,450 ft; 90% are shallower than 1,665 ft.

How much does it cost to drill a well in and around Harrold (57536)?

Applying published per-foot rates to the local median depth of 53 ft: drilling and casing alone typically runs $1,325–$3,445; a complete system including pump, pressure tank, and hookup typically runs $3,180–$5,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Harrold (57536)?

The median static water level is 10 ft below ground surface (middle half of wells: 9 ft–13 ft), from 8 measurements.

Drilled depth distribution

0–50 ft 49 50–100 ft 10 100–150 ft 5 150–200 ft 4 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 30
Looking at a specific property in Harrold (57536)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Harrold (57536)

Free. Goes to licensed drillers working Hughes County.

Part of Hughes County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.