⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Gregory County › Dallas (57529)

Dallas, SD (57529): well depth, water level & drilling cost

✓ 62 SD DANR records · Gregory County

60 ftmedian well depth
49 ft–63 fttypical depth range
—median static water level
—median yield (— tests)

Pull every recorded well near a Dallas (57529) address — $49

How deep are wells in and around Dallas (57529), South Dakota?

The median drilled well depth in and around Dallas (57529) is 60 ft, based on 62 wells with recorded depths in the state SD DANR database. Half fall between 49 ft and 63 ft; 90% are shallower than 74 ft.

How much does it cost to drill a well in and around Dallas (57529)?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dallas (57529)?

Few static water level measurements are recorded for this area.

Drilled depth distribution

0–50 ft 16 50–100 ft 44 100–150 ft 0 150–200 ft 0 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 2
Looking at a specific property in Dallas (57529)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dallas (57529)

Free. Goes to licensed drillers working Gregory County.

Part of Gregory County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.