⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Tripp County › Colome (57528)

Colome, SD (57528): well depth, water level & drilling cost

✓ 95 SD DANR records · Tripp County

60 ftmedian well depth
50 ft–70 fttypical depth range
40 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Colome (57528) address — $49

How deep are wells in and around Colome (57528), South Dakota?

The median drilled well depth in and around Colome (57528) is 60 ft, based on 95 wells with recorded depths in the state SD DANR database. Half fall between 50 ft and 70 ft; 90% are shallower than 112 ft.

How much does it cost to drill a well in and around Colome (57528)?

Applying published per-foot rates to the local median depth of 60 ft: drilling and casing alone typically runs $1,500–$3,900; a complete system including pump, pressure tank, and hookup typically runs $3,600–$6,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Colome (57528)?

The median static water level is 40 ft below ground surface (middle half of wells: 10 ft–60 ft), from 9 measurements.

Drilled depth distribution

0–50 ft 21 50–100 ft 61 100–150 ft 7 150–200 ft 3 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 3
Looking at a specific property in Colome (57528)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Colome (57528)

Free. Goes to licensed drillers working Tripp County.

Part of Tripp County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.