⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Hughes County › Blunt (57522)

Blunt, SD (57522): well depth, water level & drilling cost

✓ 152 SD DANR records · Hughes County

70 ftmedian well depth
55 ft–1,405 fttypical depth range
25 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Blunt (57522) address — $49

How deep are wells in and around Blunt (57522), South Dakota?

The median drilled well depth in and around Blunt (57522) is 70 ft, based on 152 wells with recorded depths in the state SD DANR database. Half fall between 55 ft and 1,405 ft; 90% are shallower than 1,571 ft.

How much does it cost to drill a well in and around Blunt (57522)?

Applying published per-foot rates to the local median depth of 70 ft: drilling and casing alone typically runs $1,750–$4,550; a complete system including pump, pressure tank, and hookup typically runs $4,200–$7,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Blunt (57522)?

The median static water level is 25 ft below ground surface (middle half of wells: 13 ft–32 ft), from 9 measurements.

Drilled depth distribution

0–50 ft 29 50–100 ft 65 100–150 ft 9 150–200 ft 2 200–300 ft 3 300–400 ft 1 400–600 ft 0 600+ ft 43
Looking at a specific property in Blunt (57522)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Blunt (57522)

Free. Goes to licensed drillers working Hughes County.

Part of Hughes County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.