⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Edmunds County › Roscoe (57471)

Roscoe, SD (57471): well depth, water level & drilling cost

✓ 79 SD DANR records · Edmunds County

451 ftmedian well depth
330 ft–1,580 fttypical depth range
78 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Roscoe (57471) address — $49

How deep are wells in and around Roscoe (57471), South Dakota?

The median drilled well depth in and around Roscoe (57471) is 451 ft, based on 79 wells with recorded depths in the state SD DANR database. Half fall between 330 ft and 1,580 ft; 90% are shallower than 1,833 ft.

How much does it cost to drill a well in and around Roscoe (57471)?

Applying published per-foot rates to the local median depth of 451 ft: drilling and casing alone typically runs $11,275–$29,315; a complete system including pump, pressure tank, and hookup typically runs $27,060–$45,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Roscoe (57471)?

The median static water level is 78 ft below ground surface (middle half of wells: 65 ft–105 ft), from 4 measurements.

Drilled depth distribution

0–50 ft 5 50–100 ft 2 100–150 ft 0 150–200 ft 1 200–300 ft 6 300–400 ft 15 400–600 ft 12 600+ ft 38
Looking at a specific property in Roscoe (57471)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Roscoe (57471)

Free. Goes to licensed drillers working Edmunds County.

Part of Edmunds County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.