South Dakota Well Data › Marshall County › Britton (57430)
Britton, SD (57430): well depth, water level & drilling cost
✓ 304 SD DANR records · Marshall County
Pull every recorded well near a Britton (57430) address — $49
How deep are wells in and around Britton (57430), South Dakota?
The median drilled well depth in and around Britton (57430) is 814 ft, based on 304 wells with recorded depths in the state SD DANR database. Half fall between 159 ft and 969 ft; 90% are shallower than 1,054 ft.
How much does it cost to drill a well in and around Britton (57430)?
Applying published per-foot rates to the local median depth of 814 ft: drilling and casing alone typically runs $20,350–$52,910; a complete system including pump, pressure tank, and hookup typically runs $48,840–$81,400. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Britton (57430)?
The median static water level is 56 ft below ground surface (middle half of wells: 37 ft–190 ft), from 7 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Marshall County.
Part of Marshall County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.