⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Brown County › Bath (57427)

Bath, SD (57427): well depth, water level & drilling cost

✓ 255 SD DANR records · Brown County

974 ftmedian well depth
876 ft–1,100 fttypical depth range
13 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Bath (57427) address — $49

How deep are wells in and around Bath (57427), South Dakota?

The median drilled well depth in and around Bath (57427) is 974 ft, based on 254 wells with recorded depths in the state SD DANR database. Half fall between 876 ft and 1,100 ft; 90% are shallower than 1,151 ft.

How much does it cost to drill a well in and around Bath (57427)?

Applying published per-foot rates to the local median depth of 974 ft: drilling and casing alone typically runs $24,350–$63,310; a complete system including pump, pressure tank, and hookup typically runs $58,440–$97,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Bath (57427)?

The median static water level is 13 ft below ground surface (middle half of wells: 12 ft–13 ft), from 3 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 33 100–150 ft 13 150–200 ft 0 200–300 ft 3 300–400 ft 0 400–600 ft 0 600+ ft 196
Looking at a specific property in Bath (57427)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Bath (57427)

Free. Goes to licensed drillers working Brown County.

Part of Brown County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.