⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Brown County › Aberdeen (57402)

Aberdeen, SD (57402): well depth, water level & drilling cost

✓ 146 SD DANR records · Brown County

916 ftmedian well depth
56 ft–1,030 fttypical depth range
27 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Aberdeen (57402) address — $49

How deep are wells in and around Aberdeen (57402), South Dakota?

The median drilled well depth in and around Aberdeen (57402) is 916 ft, based on 145 wells with recorded depths in the state SD DANR database. Half fall between 56 ft and 1,030 ft; 90% are shallower than 1,134 ft.

How much does it cost to drill a well in and around Aberdeen (57402)?

Applying published per-foot rates to the local median depth of 916 ft: drilling and casing alone typically runs $22,900–$59,540; a complete system including pump, pressure tank, and hookup typically runs $54,960–$91,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Aberdeen (57402)?

The median static water level is 27 ft below ground surface (middle half of wells: 20 ft–35 ft), from 2 measurements.

Drilled depth distribution

0–50 ft 31 50–100 ft 19 100–150 ft 11 150–200 ft 0 200–300 ft 0 300–400 ft 0 400–600 ft 0 600+ ft 84
Looking at a specific property in Aberdeen (57402)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Aberdeen (57402)

Free. Goes to licensed drillers working Brown County.

Part of Brown County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.