⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Brown County › Aberdeen (57401)

Aberdeen, SD (57401): well depth, water level & drilling cost

✓ 792 SD DANR records · Brown County

49 ftmedian well depth
26 ft–1,030 fttypical depth range
7 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Aberdeen (57401) address — $49

How deep are wells in and around Aberdeen (57401), South Dakota?

The median drilled well depth in and around Aberdeen (57401) is 49 ft, based on 778 wells with recorded depths in the state SD DANR database. Half fall between 26 ft and 1,030 ft; 90% are shallower than 1,220 ft.

How much does it cost to drill a well in and around Aberdeen (57401)?

Applying published per-foot rates to the local median depth of 49 ft: drilling and casing alone typically runs $1,225–$3,185; a complete system including pump, pressure tank, and hookup typically runs $2,940–$4,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Aberdeen (57401)?

The median static water level is 7 ft below ground surface (middle half of wells: 3 ft–10 ft), from 14 measurements.

Drilled depth distribution

0–50 ft 390 50–100 ft 79 100–150 ft 21 150–200 ft 7 200–300 ft 4 300–400 ft 0 400–600 ft 1 600+ ft 276
Looking at a specific property in Aberdeen (57401)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Aberdeen (57401)

Free. Goes to licensed drillers working Brown County.

Part of Brown County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.