⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Hutchinson County › Tripp (57376)

Tripp, SD (57376): well depth, water level & drilling cost

✓ 78 SD DANR records · Hutchinson County

282 ftmedian well depth
236 ft–440 fttypical depth range
109 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Tripp (57376) address — $49

How deep are wells in and around Tripp (57376), South Dakota?

The median drilled well depth in and around Tripp (57376) is 282 ft, based on 78 wells with recorded depths in the state SD DANR database. Half fall between 236 ft and 440 ft; 90% are shallower than 612 ft.

How much does it cost to drill a well in and around Tripp (57376)?

Applying published per-foot rates to the local median depth of 282 ft: drilling and casing alone typically runs $7,050–$18,330; a complete system including pump, pressure tank, and hookup typically runs $16,920–$28,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Tripp (57376)?

The median static water level is 109 ft below ground surface (middle half of wells: 57 ft–221 ft), from 7 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 0 100–150 ft 1 150–200 ft 2 200–300 ft 33 300–400 ft 11 400–600 ft 15 600+ ft 9
Looking at a specific property in Tripp (57376)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Tripp (57376)

Free. Goes to licensed drillers working Hutchinson County.

Part of Hutchinson County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.