⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Hanson County › Spencer (57374)

Spencer, SD (57374): well depth, water level & drilling cost

✓ 62 SD DANR records · Hanson County

208 ftmedian well depth
171 ft–318 fttypical depth range
76 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Spencer (57374) address — $49

How deep are wells in and around Spencer (57374), South Dakota?

The median drilled well depth in and around Spencer (57374) is 208 ft, based on 62 wells with recorded depths in the state SD DANR database. Half fall between 171 ft and 318 ft; 90% are shallower than 548 ft.

How much does it cost to drill a well in and around Spencer (57374)?

Applying published per-foot rates to the local median depth of 208 ft: drilling and casing alone typically runs $5,200–$13,520; a complete system including pump, pressure tank, and hookup typically runs $12,480–$20,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Spencer (57374)?

The median static water level is 76 ft below ground surface (middle half of wells: 71 ft–78 ft), from 4 measurements.

Drilled depth distribution

0–50 ft 2 50–100 ft 1 100–150 ft 9 150–200 ft 14 200–300 ft 19 300–400 ft 3 400–600 ft 12 600+ ft 2
Looking at a specific property in Spencer (57374)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Spencer (57374)

Free. Goes to licensed drillers working Hanson County.

Part of Hanson County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.