⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Brule County › Pukwana (57370)

Pukwana, SD (57370): well depth, water level & drilling cost

✓ 150 SD DANR records · Brule County

910 ftmedian well depth
848 ft–962 fttypical depth range
100 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Pukwana (57370) address — $49

How deep are wells in and around Pukwana (57370), South Dakota?

The median drilled well depth in and around Pukwana (57370) is 910 ft, based on 150 wells with recorded depths in the state SD DANR database. Half fall between 848 ft and 962 ft; 90% are shallower than 1,032 ft.

How much does it cost to drill a well in and around Pukwana (57370)?

Applying published per-foot rates to the local median depth of 910 ft: drilling and casing alone typically runs $22,750–$59,150; a complete system including pump, pressure tank, and hookup typically runs $54,600–$91,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Pukwana (57370)?

The median static water level is 100 ft below ground surface (middle half of wells: 81 ft–106 ft), from 4 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 2 100–150 ft 7 150–200 ft 3 200–300 ft 1 300–400 ft 0 400–600 ft 0 600+ ft 133
Looking at a specific property in Pukwana (57370)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Pukwana (57370)

Free. Goes to licensed drillers working Brule County.

Part of Brule County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.