South Dakota Well Data › Davison County › Mount Vernon (57363)
Mount Vernon, SD (57363): well depth, water level & drilling cost
✓ 174 SD DANR records · Davison County
Pull every recorded well near a Mount Vernon (57363) address — $49
How deep are wells in and around Mount Vernon (57363), South Dakota?
The median drilled well depth in and around Mount Vernon (57363) is 180 ft, based on 174 wells with recorded depths in the state SD DANR database. Half fall between 141 ft and 234 ft; 90% are shallower than 353 ft.
How much does it cost to drill a well in and around Mount Vernon (57363)?
Applying published per-foot rates to the local median depth of 180 ft: drilling and casing alone typically runs $4,500–$11,700; a complete system including pump, pressure tank, and hookup typically runs $10,800–$18,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Mount Vernon (57363)?
The median static water level is 75 ft below ground surface (middle half of wells: 59 ft–98 ft), from 18 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Davison County.
Part of Davison County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.