⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Hand County › Miller (57362)

Miller, SD (57362): well depth, water level & drilling cost

✓ 228 SD DANR records · Hand County

1,127 ftmedian well depth
29 ft–1,266 fttypical depth range
150 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Miller (57362) address — $49

How deep are wells in and around Miller (57362), South Dakota?

The median drilled well depth in and around Miller (57362) is 1,127 ft, based on 223 wells with recorded depths in the state SD DANR database. Half fall between 29 ft and 1,266 ft; 90% are shallower than 1,456 ft.

How much does it cost to drill a well in and around Miller (57362)?

Applying published per-foot rates to the local median depth of 1,127 ft: drilling and casing alone typically runs $28,175–$73,255; a complete system including pump, pressure tank, and hookup typically runs $67,620–$112,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Miller (57362)?

The median static water level is 150 ft below ground surface (middle half of wells: 20 ft–280 ft), from 4 measurements.

Drilled depth distribution

0–50 ft 59 50–100 ft 7 100–150 ft 11 150–200 ft 16 200–300 ft 8 300–400 ft 1 400–600 ft 2 600+ ft 119
Looking at a specific property in Miller (57362)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Miller (57362)

Free. Goes to licensed drillers working Hand County.

Part of Hand County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.