⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Beadle County › Huron (57350)

Huron, SD (57350): well depth, water level & drilling cost

✓ 471 SD DANR records · Beadle County

115 ftmedian well depth
85 ft–782 fttypical depth range
18 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Huron (57350) address — $49

How deep are wells in and around Huron (57350), South Dakota?

The median drilled well depth in and around Huron (57350) is 115 ft, based on 466 wells with recorded depths in the state SD DANR database. Half fall between 85 ft and 782 ft; 90% are shallower than 966 ft.

How much does it cost to drill a well in and around Huron (57350)?

Applying published per-foot rates to the local median depth of 115 ft: drilling and casing alone typically runs $2,875–$7,475; a complete system including pump, pressure tank, and hookup typically runs $6,900–$11,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Huron (57350)?

The median static water level is 18 ft below ground surface (middle half of wells: 17 ft–40 ft), from 3 measurements.

Drilled depth distribution

0–50 ft 42 50–100 ft 125 100–150 ft 117 150–200 ft 5 200–300 ft 5 300–400 ft 1 400–600 ft 0 600+ ft 171
Looking at a specific property in Huron (57350)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Huron (57350)

Free. Goes to licensed drillers working Beadle County.

Part of Beadle County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.