⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Davison County › Ethan (57334)

Ethan, SD (57334): well depth, water level & drilling cost

✓ 138 SD DANR records · Davison County

131 ftmedian well depth
86 ft–209 fttypical depth range
31 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Ethan (57334) address — $49

How deep are wells in and around Ethan (57334), South Dakota?

The median drilled well depth in and around Ethan (57334) is 131 ft, based on 138 wells with recorded depths in the state SD DANR database. Half fall between 86 ft and 209 ft; 90% are shallower than 276 ft.

How much does it cost to drill a well in and around Ethan (57334)?

Applying published per-foot rates to the local median depth of 131 ft: drilling and casing alone typically runs $3,275–$8,515; a complete system including pump, pressure tank, and hookup typically runs $7,860–$13,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Ethan (57334)?

The median static water level is 31 ft below ground surface (middle half of wells: 18 ft–69 ft), from 23 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 30 100–150 ft 41 150–200 ft 21 200–300 ft 24 300–400 ft 7 400–600 ft 6 600+ ft 0
Looking at a specific property in Ethan (57334)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Ethan (57334)

Free. Goes to licensed drillers working Davison County.

Part of Davison County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.