South Dakota Well Data › Brule County › Chamberlain (57325)
Chamberlain, SD (57325): well depth, water level & drilling cost
✓ 56 SD DANR records · Brule County
Pull every recorded well near a Chamberlain (57325) address — $49
How deep are wells in and around Chamberlain (57325), South Dakota?
The median drilled well depth in and around Chamberlain (57325) is 895 ft, based on 56 wells with recorded depths in the state SD DANR database. Half fall between 20 ft and 1,021 ft; 90% are shallower than 1,120 ft.
How much does it cost to drill a well in and around Chamberlain (57325)?
Applying published per-foot rates to the local median depth of 895 ft: drilling and casing alone typically runs $22,375–$58,175; a complete system including pump, pressure tank, and hookup typically runs $53,700–$89,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Chamberlain (57325)?
The median static water level is 85 ft below ground surface (middle half of wells: 78 ft–93 ft), from 2 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Brule County.
Part of Brule County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.