South Dakota Well Data › Codington County › South Shore (57263)
South Shore, SD (57263): well depth, water level & drilling cost
✓ 202 SD DANR records · Codington County
Pull every recorded well near a South Shore (57263) address — $49
How deep are wells in and around South Shore (57263), South Dakota?
The median drilled well depth in and around South Shore (57263) is 82 ft, based on 201 wells with recorded depths in the state SD DANR database. Half fall between 40 ft and 160 ft; 90% are shallower than 225 ft.
How much does it cost to drill a well in and around South Shore (57263)?
Applying published per-foot rates to the local median depth of 82 ft: drilling and casing alone typically runs $2,050–$5,330; a complete system including pump, pressure tank, and hookup typically runs $4,920–$8,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around South Shore (57263)?
The median static water level is 26 ft below ground surface (middle half of wells: 12 ft–43 ft), from 15 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Codington County.
Part of Codington County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.