⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Roberts County › Peever (57257)

Peever, SD (57257): well depth, water level & drilling cost

✓ 123 SD DANR records · Roberts County

89 ftmedian well depth
54 ft–149 fttypical depth range
14 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Peever (57257) address — $49

How deep are wells in and around Peever (57257), South Dakota?

The median drilled well depth in and around Peever (57257) is 89 ft, based on 122 wells with recorded depths in the state SD DANR database. Half fall between 54 ft and 149 ft; 90% are shallower than 440 ft.

How much does it cost to drill a well in and around Peever (57257)?

Applying published per-foot rates to the local median depth of 89 ft: drilling and casing alone typically runs $2,225–$5,785; a complete system including pump, pressure tank, and hookup typically runs $5,340–$8,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Peever (57257)?

The median static water level is 14 ft below ground surface (middle half of wells: 9 ft–22 ft), from 3 measurements.

Drilled depth distribution

0–50 ft 30 50–100 ft 39 100–150 ft 22 150–200 ft 8 200–300 ft 6 300–400 ft 3 400–600 ft 7 600+ ft 7
Looking at a specific property in Peever (57257)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Peever (57257)

Free. Goes to licensed drillers working Roberts County.

Part of Roberts County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.