⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Hamlin County › Estelline (57234)

Estelline, SD (57234): well depth, water level & drilling cost

✓ 192 SD DANR records · Hamlin County

43 ftmedian well depth
32 ft–66 fttypical depth range
11 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Estelline (57234) address — $49

How deep are wells in and around Estelline (57234), South Dakota?

The median drilled well depth in and around Estelline (57234) is 43 ft, based on 191 wells with recorded depths in the state SD DANR database. Half fall between 32 ft and 66 ft; 90% are shallower than 90 ft.

How much does it cost to drill a well in and around Estelline (57234)?

Applying published per-foot rates to the local median depth of 43 ft: drilling and casing alone typically runs $1,075–$2,795; a complete system including pump, pressure tank, and hookup typically runs $2,580–$4,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Estelline (57234)?

The median static water level is 11 ft below ground surface (middle half of wells: 7 ft–22 ft), from 24 measurements.

Drilled depth distribution

0–50 ft 107 50–100 ft 72 100–150 ft 6 150–200 ft 4 200–300 ft 1 300–400 ft 0 400–600 ft 1 600+ ft 0
Looking at a specific property in Estelline (57234)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Estelline (57234)

Free. Goes to licensed drillers working Hamlin County.

Part of Hamlin County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.