South Dakota Well Data › Minnehaha County › Sioux Falls (57104)
Sioux Falls, SD (57104): well depth, water level & drilling cost
✓ 189 SD DANR records · Minnehaha County
Pull every recorded well near a Sioux Falls (57104) address — $49
How deep are wells in and around Sioux Falls (57104), South Dakota?
The median drilled well depth in and around Sioux Falls (57104) is 19 ft, based on 188 wells with recorded depths in the state SD DANR database. Half fall between 15 ft and 28 ft; 90% are shallower than 36 ft.
How much does it cost to drill a well in and around Sioux Falls (57104)?
Applying published per-foot rates to the local median depth of 19 ft: drilling and casing alone typically runs $475–$1,235; a complete system including pump, pressure tank, and hookup typically runs $1,140–$1,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Sioux Falls (57104)?
The median static water level is 8 ft below ground surface (middle half of wells: 8 ft–8 ft), from 1 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Minnehaha County.
Part of Minnehaha County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.