⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Miner County › Winfred (57076)

Winfred, SD (57076): well depth, water level & drilling cost

✓ 78 SD DANR records · Miner County

120 ftmedian well depth
60 ft–226 fttypical depth range
29 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Winfred (57076) address — $49

How deep are wells in and around Winfred (57076), South Dakota?

The median drilled well depth in and around Winfred (57076) is 120 ft, based on 77 wells with recorded depths in the state SD DANR database. Half fall between 60 ft and 226 ft; 90% are shallower than 301 ft.

How much does it cost to drill a well in and around Winfred (57076)?

Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Winfred (57076)?

The median static water level is 29 ft below ground surface (middle half of wells: 13 ft–138 ft), from 8 measurements.

Drilled depth distribution

0–50 ft 15 50–100 ft 16 100–150 ft 13 150–200 ft 10 200–300 ft 13 300–400 ft 5 400–600 ft 5 600+ ft 0
Looking at a specific property in Winfred (57076)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Winfred (57076)

Free. Goes to licensed drillers working Miner County.

Part of Miner County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.