⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Minnehaha County › Renner (57055)

Renner, SD (57055): well depth, water level & drilling cost

✓ 187 SD DANR records · Minnehaha County

36 ftmedian well depth
25 ft–43 fttypical depth range
37 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Renner (57055) address — $49

How deep are wells in and around Renner (57055), South Dakota?

The median drilled well depth in and around Renner (57055) is 36 ft, based on 186 wells with recorded depths in the state SD DANR database. Half fall between 25 ft and 43 ft; 90% are shallower than 108 ft.

How much does it cost to drill a well in and around Renner (57055)?

Applying published per-foot rates to the local median depth of 36 ft: drilling and casing alone typically runs $900–$2,340; a complete system including pump, pressure tank, and hookup typically runs $2,160–$3,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Renner (57055)?

The median static water level is 37 ft below ground surface (middle half of wells: 30 ft–38 ft), from 8 measurements.

Drilled depth distribution

0–50 ft 150 50–100 ft 14 100–150 ft 8 150–200 ft 3 200–300 ft 8 300–400 ft 0 400–600 ft 2 600+ ft 1
Looking at a specific property in Renner (57055)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Renner (57055)

Free. Goes to licensed drillers working Minnehaha County.

Part of Minnehaha County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.