⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Turner County › Marion (57043)

Marion, SD (57043): well depth, water level & drilling cost

✓ 63 SD DANR records · Turner County

240 ftmedian well depth
154 ft–313 fttypical depth range
94 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Marion (57043) address — $49

How deep are wells in and around Marion (57043), South Dakota?

The median drilled well depth in and around Marion (57043) is 240 ft, based on 63 wells with recorded depths in the state SD DANR database. Half fall between 154 ft and 313 ft; 90% are shallower than 402 ft.

How much does it cost to drill a well in and around Marion (57043)?

Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Marion (57043)?

The median static water level is 94 ft below ground surface (middle half of wells: 81 ft–113 ft), from 6 measurements.

Drilled depth distribution

0–50 ft 8 50–100 ft 1 100–150 ft 7 150–200 ft 6 200–300 ft 22 300–400 ft 11 400–600 ft 8 600+ ft 0
Looking at a specific property in Marion (57043)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Marion (57043)

Free. Goes to licensed drillers working Turner County.

Part of Turner County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.