South Dakota Well Data › Yankton County › Lesterville (57040)
Lesterville, SD (57040): well depth, water level & drilling cost
✓ 108 SD DANR records · Yankton County
Pull every recorded well near a Lesterville (57040) address — $49
How deep are wells in and around Lesterville (57040), South Dakota?
The median drilled well depth in and around Lesterville (57040) is 239 ft, based on 99 wells with recorded depths in the state SD DANR database. Half fall between 200 ft and 297 ft; 90% are shallower than 621 ft.
How much does it cost to drill a well in and around Lesterville (57040)?
Applying published per-foot rates to the local median depth of 239 ft: drilling and casing alone typically runs $5,975–$15,535; a complete system including pump, pressure tank, and hookup typically runs $14,340–$23,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Lesterville (57040)?
The median static water level is 106 ft below ground surface (middle half of wells: 83 ft–124 ft), from 12 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Yankton County.
Part of Yankton County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.