⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Lincoln County › Hudson (57034)

Hudson, SD (57034): well depth, water level & drilling cost

✓ 71 SD DANR records · Lincoln County

74 ftmedian well depth
40 ft–247 fttypical depth range
146 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Hudson (57034) address — $49

How deep are wells in and around Hudson (57034), South Dakota?

The median drilled well depth in and around Hudson (57034) is 74 ft, based on 71 wells with recorded depths in the state SD DANR database. Half fall between 40 ft and 247 ft; 90% are shallower than 504 ft.

How much does it cost to drill a well in and around Hudson (57034)?

Applying published per-foot rates to the local median depth of 74 ft: drilling and casing alone typically runs $1,850–$4,810; a complete system including pump, pressure tank, and hookup typically runs $4,440–$7,400. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hudson (57034)?

The median static water level is 146 ft below ground surface (middle half of wells: 105 ft–158 ft), from 6 measurements.

Drilled depth distribution

0–50 ft 28 50–100 ft 9 100–150 ft 7 150–200 ft 6 200–300 ft 4 300–400 ft 3 400–600 ft 7 600+ ft 7
Looking at a specific property in Hudson (57034)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hudson (57034)

Free. Goes to licensed drillers working Lincoln County.

Part of Lincoln County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.