⟁ South Dakota Well Data field records · 2026 survey

South Dakota Well Data › Minnehaha County › Brandon (57005)

Brandon, SD (57005): well depth, water level & drilling cost

✓ 73 SD DANR records · Minnehaha County

108 ftmedian well depth
56 ft–204 fttypical depth range
47 ftmedian static water level
—median yield (— tests)

Pull every recorded well near a Brandon (57005) address — $49

How deep are wells in and around Brandon (57005), South Dakota?

The median drilled well depth in and around Brandon (57005) is 108 ft, based on 73 wells with recorded depths in the state SD DANR database. Half fall between 56 ft and 204 ft; 90% are shallower than 286 ft.

How much does it cost to drill a well in and around Brandon (57005)?

Applying published per-foot rates to the local median depth of 108 ft: drilling and casing alone typically runs $2,700–$7,020; a complete system including pump, pressure tank, and hookup typically runs $6,480–$10,800. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Brandon (57005)?

The median static water level is 47 ft below ground surface (middle half of wells: 37 ft–49 ft), from 3 measurements.

Drilled depth distribution

0–50 ft 15 50–100 ft 15 100–150 ft 14 150–200 ft 10 200–300 ft 13 300–400 ft 4 400–600 ft 1 600+ ft 1
Looking at a specific property in Brandon (57005)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Brandon (57005)

Free. Goes to licensed drillers working Minnehaha County.

Part of Minnehaha County well records.

Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.