South Dakota Well Data › Lincoln County › Beresford (57004)
Beresford, SD (57004): well depth, water level & drilling cost
✓ 115 SD DANR records · Lincoln County
Pull every recorded well near a Beresford (57004) address — $49
How deep are wells in and around Beresford (57004), South Dakota?
The median drilled well depth in and around Beresford (57004) is 111 ft, based on 115 wells with recorded depths in the state SD DANR database. Half fall between 80 ft and 172 ft; 90% are shallower than 525 ft.
How much does it cost to drill a well in and around Beresford (57004)?
Applying published per-foot rates to the local median depth of 111 ft: drilling and casing alone typically runs $2,775–$7,215; a complete system including pump, pressure tank, and hookup typically runs $6,660–$11,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Beresford (57004)?
The median static water level is 63 ft below ground surface (middle half of wells: 43 ft–104 ft), from 14 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lincoln County.
Part of Lincoln County well records.
Method: medians computed from SD DANR records (SD DANR NR68 well completion reports, water wells only (monitoring, test-hole, geothermal-loop and dewatering records excluded); depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.